User guide

Wireless Status and Settings

Wireless Network Parameters on the LCD

14143L-008 Rev. B Wireless User Guide 2/16/11

ACTIVE PRINTSRVR

View the Active Print Server

This menu item displays which print server is being used. This tells which

device’s settings such as IP protocol and IP address are being displayed

under those menu items.

Selections:

• WIRELESS indicates that the wireless device is active.

• INTERNAL WIRED indicates that the internal 10/100 option board is

active.

• EXTERNAL WIRED indicates that the external print server is active.

• NONE indicates that at least one of the network options is installed but

none of them are active. When NONE is shown for this menu item, the

device-specific items such as IP protocol and IP address will not display.

Default Value: NONE

Corresponding ZPL Command: none

Corresponding SGD Command: none

IP PROTOCOL View or Change the IP Resolution Method

This parameter tells if the user (permanent) or the server (dynamic) selects

the IP address. If a dynamic option is chosen, this parameter tells the

method(s) by which the print server (wired or wireless) receives the IP

address from the server.

Selections: ALL, BOOTP, DHCP, DHCP AND BOOTP, PERMANENT

Default Value: All

Corresponding ZPL Command: ^ND

Corresponding SGD Command: wlan.ip.protocol

IP ADDRESS View or Change the Printer’s IP Address

This parameter can be modified only when

PERMANENT is selected for

OBTAIN IP ADDRESS.

Selections: 0 to 255 for each field

Default Value: 0.0.0.0 displays while an IP address is being obtained, and

then defaults to 192.168.254.254 if no IP address is obtained

Note • Leading zeroes are not shown in the address.

Corresponding ZPL Command: ^ND

Corresponding SGD Command: wlan.ip.addr

Table 11 • Wireless Parameters for Xi4, R110Xi4,

ZM400, ZM600, RZ400, and RZ600 Printers (Continued)

Parameter

Function

1 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.