User guide

33
Wireless Status and Settings
Print Network Configuration Information
2/16/11 Wireless User Guide 14143L-008 Rev. B
Print Network Configuration Information
Most printers and print engines print the print server settings on a network configuration label.
The HC100 printer prints the print server settings on a printer configuration wristband.
Network Configuration Label
A network configuration label (Figure 5) lists the settings for the print servers installed in your
printer. If a particular type of print server is not installed, the IP information for that print
server appears as all zeroes (000.000.000.000). The active print server is indicated by an
asterisk (see Determining the Active Print Server on page 21 for more information).
Figure 5 • Sample Network Configuration Label
To print a network configuration label, complete these steps:
1. From the control panel, enter Setup mode. (Refer to the User Guide for your printer for
specific instructions on how to use the control panel.)
2. Scroll to LIST NETWORK (On an S4M printer, scroll to level 3 parameter PRINT OUT
NETWORK
).
3. Confirm printing.
A network configuration label prints. Your label may look slightly different than this
example, depending on which print server and which printer/print engine you are using.