User guide

25
Introduction
Install a Wireless Radio Card or Compact Flash Wireless Radio Card
2/16/11 Wireless User Guide 14143L-008 Rev. B
4. Place the RF card cover over the wireless radio card, and secure it with a small screw.
5. Turn on (I) the printer.
The printer restarts and uses the wireless radio card to communicate with your WLAN.
Allow several minutes for the printer to connect to the network. For more information
about wireless status, refer to View Wireless Status through the Control Panel on page 31
or Troubleshooting on page 45.
Note • The S4M, ZM400, ZM600, RZ400, and RZ600 printers do not use the RF card
cover.
1
Clear plastic RF card cover
(not used on all printers)
2
Screw
3
Wireless radio card
3
1
2