User guide

Introduction

Connecting to a Wireless Network

14143L-008 Rev. B Wireless User Guide 2/16/11

Supported Security Types

Your WLAN can use any of a number of different types of security and encryption, or it can

use none at all. This section shows which security types you can use with the different

ZebraNet wireless print servers.

ZebraNet Wireless Plus Print Server

Table 3 lists the security types that are supported by the Wireless Plus Print Server. Support

varies by the card manufacturer and the card type. Select a wireless radio card that is supported

by your wireless print server and that supports the security type being used on your WLAN.

Note • Configuring a printer for WPA also allows the printer to be used in WPA2

environments.

Table 3 • Security Types Supported on the Wireless Plus Print Server

Security Type

Card Manufacturer

Cisco Symbol

Cisco CB21 Cisco 350

LA-4121

(PCMCIA)

LA-4137

Compact Flash

Open Yes Yes Yes Yes

EAP-FAST Yes Not Supported Yes Yes

EAP-TLS Yes Not Supported Not Supported Yes

EAP-TTLS Yes Not Supported Not Supported Yes

Kerberos Not Supported Not Supported Yes Yes

LEAP Yes Yes Yes Yes

PEAP Yes Not Supported Yes Yes

WEP (40 bit and 128 bit) Yes Yes Yes Yes

WPA - LEAP Yes Yes Yes Yes

WPA - PSK Yes Yes Yes Yes

WPA- EAP-FAST Yes Yes Yes Yes

WPA- EAP-TLS Yes Yes Yes Yes

WPA- EAP-TTLS Yes Yes Yes Yes

WPA- PEAP Yes Yes Yes Yes

WPA2 - LEAP Yes Not Supported Not Supported Not Supported

WPA2 - PSK* Yes* Not Supported Not Supported Not Supported

WPA2- EAP-FAST Yes Not Supported Not Supported Not Supported

WPA2- EAP-TLS Yes Not Supported Not Supported Not Supported

* Key rotation for WPA2 PSK is supported in firmware version V60.15.8Z or later, V53.15.8Z or later., V54.16.x or later, and

RX.15.8Z or later.