User guide

Introduction

Printer Requirements and Print Server Features

14143L-008 Rev. B Wireless User Guide 2/16/11

Printer Requirements and Print Server Features

This section defines the requirements for using the different ZebraNet wireless print servers. It

also defines features of and limitations to the wireless print servers on different printer models.

Hardware

PCMCIA and Compact Flash Memory Cards PCMCIA memory or Compact Flash

memory cards will not work and are not supported on the Wireless Plus Print Server. The

Internal Wireless Plus Print Server and the b/g Print Server do not include a slot for these card

types.

Wireless Card Socket Option The ZebraNet wireless print server options replace the

Wireless Card Socket Option (WCSO) in 105SL printers with a serial number of 6400357 or

greater. Do not install a wireless option board on a 105SL printer with a serial number that is

less than 6400357.

Wireless Option Board A special wireless option board must be installed in your

printer/print engine. To determine if you have a wireless option board installed, use a printer

configuration label (refer to the instructions in the User Guide that came with your printer). To

purchase a wireless option, contact your authorized Zebra reseller for more information.

The wireless option boards are identified by the HARDWARE ID line on the printer

configuration label.

The part numbers shown on the HARDWARE ID line indicate the wireless print servers as

shown in Table 1.

Table 1 • Zebra Part Numbers for ZebraNet Wireless Print Server Boards

Part Number Corresponds to the Following

1033557-0xx b/g Print Server

1033605-001

29652-0xx Internal Wireless Plus Print Server

29883-001

29651-0xx Wireless Plus Print Server

29882-001

* Not supported by this manual. Refer to the Wireless Print Server User Guide, part number 13422L-XXX.