Service manual

October, 01 TTPM2 Operators’ Guide 9
3 MAINTENANCE
3.1 Daily (performed by operator)
This should be carried out Daily in high print-volume environment and Weekly in low and
medium volume environments
One Cardclene
1
cleaning card will be required for the following process
• Remove ticket stock.
• Eject ticket from inside the printer by pressing the button next to the green light.
• Insert Cardclene into the upper rear ticket entry (A in illustration) and press the front
button (green). The ticket will be taken into the printer and ejected in the front.
For best results the card should be inserted at least 4 times, two in the upper and two
in the lower ticket entry. The card is designed to remove debris i.e. paper dust.
So therefore you are advised not to insert the card in the same way every time, it
should be rotated before every insertion so that all surfaces are fully used.
• Finally reload the ticket stock and turn the printer on.
Figure 7. Inserting a cleaning card in rear ticket entry
1
See page 13, ”Cleaning products shopping list” for details.