Service manual

October, 01 TTPM2 Operators’ Guide 7
2.3 Loading tickets
NOTE! – Do not turn off the printer to load tickets.
2.3.1 Single and dual track versions
 Position the tickets behind the printer with the magnetic stripe facing down on the left
side of the printer.
 Insert the ticket material in the rear ticket entry until it stops.
SW97116
> One ticket length
90°
Figure 3. Positioning the ticket stock
Figure 4. Position of the magnetic stripe when loading paper
CAUTION! – NEVER store the tickets on the floor. Stones that enter the
printer together with the ticket material destroy the printhead.
CAUTION! – Make sure that the ticket path between the ticket material
is free from hard edges