Service manual

22 TTPM2 Operators’ Guide October, 01
7 TICKET STOCK
The TTPM2 printers are produced, calibrated for, and tested with the customers ticket
stock.
When you receive new ticket stock form your supplier; please take a moment to check
that the newly delivered tickets have the correct measurements. This may save you from
endless paper jams.
+
Transport
direction
2 ±0.3
6 ±0.5
54 +0.2, -0.4
110 ±0.25
0.6
R 3.15 ±0.3
8. max.
16 min.
Thermal
coating
Magnetic
stripe
0.04 max.
0.38±0.02
SW95044E
Stub perforation
6 mm
Perforation not allowed
within this 6 mm wide area
Figure 13. Gapped 110 mm tickets
Thickness 0.18, 0.25 or 0.40 ± 0.02 mm
Width 53.6 to 54.2 mm (most critical parameter!)
Length 86 or 110 ± 0.25 mm
Corner radius 3.15 + 0.3 mm/-0 mm. Used for optical detection of top-of form
and cut.