Specifications

03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001
13
Firmware History
Functions and features are being added from time to time affecting the firmware in the
TTPM2. The following table lists the changes of general interest.
The TTPM2 firmware, residing in programmable read-only memory (PROM), is available in
several customized versions. They differ only in minor details and are indicated by three
letters. You will find these letters on the label attached to the PROM component. The standard
version, for example, has the letters STD.
The standard version includes support for one consecutive ticket stock entry, one rear single-
ticket entry, and the front load option. Please note that only some of the FW versions after
release 2.13 have built-in support for either two consecutive ticket entries or one consecutive
ticket plus one single-ticket entry.
Single entry printer PROMs are marked FW906-260, where 906 indicate single entry and 260
indicates revision 2.60.
Dual entry printer PROMs are marked FW907-234, where 907 indicate dual entries and 234
indicates revision 2.34.
From firmware version 2.70, all firmware is 906-xxx, and you select single entry, dual entries,
or CD version with the dip-switches on the control board.
Notice that further FW revisions may have been introduced since the issue of this edition of
the TTPM2 Installation and Programming Manual. An up-to-date list of FW revisions can be
read at the Zebra web site at http://www.zebra.com.