Specifications

Document Stock
Ticket Dimensions and Perforation
88
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
Figure 28 • Non gapped tickets (for printers with burst separator)
Figure 29 • Both gapped and non-gapped tickets with center track can be used
in printers ordered with center track option
2
.
5
+
Grain direction
Transport
direction
5
3
.
9
8
±
0
.
2
L ±0.25 (see below)
0.6
R 3.18 ±0.3
Thermal
coating
Magnetic
stripe
0.04 max.
0.18 min.
0.4 max.
SW95044C
Stub perforation (if applicable)
Magnetic stripe must be cut
Tab s
L= 85.6 (standard as per ISO 7810)
L= 110.0 (customer special)
6 mm
Perforation not allowed
within this 6 mm wide area
Magnetic code must not
cross optional perforation
Optical sensor
position
+
Grain direction
Transport
direction
54 ±0.2
L ±0.25 (see below)
0.6
R 3.18 ±0.3
Thermal
coating
Magnetic
stripe
0.04 max.
0.18 min.
0.4 max.
Stub perforation (if applicable)
Magnetic stripe must be cut
Tabs
L= 85.6 (standard as per ISO 7810)
L= 110.0 (customer special)
6 mm
Perforation not allowed
within this 6 mm wide area
7.0 mm
15.82 min.
1.0
Magnetic code must not
cross optional perforation
SW95044D