Specifications

Document Stock
Ticket Dimensions and Perforation
86
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
If a ticket is perforated, for stub separation for example, the perforation shall not infringe on
the magnetic track to prevent interference with magnetically encoded data.
Ticket Dimensions and Perforation
Coercivity Low: 300 Oersted
High: 2750 Oersted (option)
Other non-standard coercivities available on request
Stock format Gapped or non-gapped consecutive form tickets. Fanfold or roll
a
.
a. Only suitable for on TTPM2 versions who where originally built for roll stock.
Sheet-cut (single) tickets for manual or dispenser loading.
Perforation cut direction Perforation and cutting of ticket material must be done from the
thermally sensitive side of the paper.
Document standard ISO No. 7810
Ticket width 53.98 ± 0.20 mm
Ticket length 85.6 ± 0.25 mm, or 110.0 ± 0.25 mm
Corner radius 3.15 ± 0.3 mm (preferably without minus tolerance). Used for
optical detection of top-of form.
Perforation for stub Placed at the trailing end of the ticket
Gapped tickets Two tabs according to Figure 27.
Non gapped tickets Equal distance between tabs according to Figure 28.