Specifications

Document Stock
Ticket Base Material
84
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
Ticket Base Material
Type of paper or equivalent is recommended
Manufacturer Type Thickness μm Sensitivity
Mitsubishi TF 1767 183 High
Mitsubishi TF 1775 181 Maximum
Mitsubishi TF 1875 200 Maximum
Mitsubishi TF 2467 255 High
Mitsubishi TF 2475 255 Maximum
Ricoh 150UT-190µ 182 Very High
Ricoh 150UT-240µ 235 Very High
Material Paper, 100 % chemical pulp, no ground wood permitted
Triplex
a
laminate
b
a. Triplex is manufactured from three paper stocks. The middle is usually recycled paper, and the
top and bottom are different papers.
b. Laminate with plastic core may destroy the printhead and prematurely wear the cutter
blades! DO NOT USE.
The perforation of the tickets may leave parts of the plastic core protruding through the sur-
face of the ticket.
These plastic tongues may scratch the printhead, and also build up static electricity dis-
charging through the printhead. This may seriously limit the printhead life.
If plastic laminate still is used, care must be taken in the manufacturing process to avoid the
plastic protrusion, and the printer must be life-tested with the intended stock before taken
into use.
Plastic (PVC)
Stiffness 18–36 g/cm (in grain direction)
Thickness Paper and laminate: 0.18–0.40
a
mm, 170–210
g/m²
a. 0.18-0.32 mm for Frontload 1 and Frontload 2 versions of the printer
Plastic (PVC): 0.18–0.25 mm
Factory setting: 0.18–0.25 mm (default)
0.26–0.32 mm (optional)
0.33–0.40 mm (optional)
Curl Deviation from flatness < 0.6 mm across the
length, width, or diagonal of the ticket