Specifications

03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001

Interface Description

The TTPM2 communicates through an RS232 serial interface.

DIP Switches

A DIP-switch is accessible through the service opening at the bottom of the TTPM2 enclosure.

The functions of these DIP-switches are (default settings in parenthesis):

Switch 1 Bit/s OFF (9600) ON 19200 ON 1200 OFF 115200

2 OFF ON OFF ON

Switch 3 Read-after-write ON = Disable OFF

4 Auto clear ON = Clear all fixed and variable data during printing OFF

5 Handshaking ON = XON/XOFF, OFF = RTS/CTS OFF

6 ACK/NAK + error code ON = enabled, OFF = Silent ON

Switch 7 Mode OFF Standard ON DCT OFF CD200 ON Test

8OFF OFFON ON

Important • DIP switches 7 and 8 are factory set and MUST NOT be changed. The switch

settings must fit the hardware of the different models