Specifications

03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001
9
Error Handling
The green indicator lights up at power ON. Should it fail to light up, switch the TTPM2 OFF
and back ON again. If the green indicator is still OFF, check your power connection both in the
TTPM2 and in the wall outlet. Also check your main power supply fuse.
Power Up
11
When turning ON the printer it checks to see if a ticket is anywhere in the printer but the
standard active position in the lower rear ticket entry. If it finds a ticket, the printer overwrites
the magnetic encoding, prints VOID, and exits the ticket through the front ticket exit, and
issues a NAK G to inform the host computer that a ticket has been voided. On printers with
front load 2 option, the printer outputs the voided ticket into the waste bin. This is a security
feature to ensure that no halfway ready tickets are outputted to the customer.
Normal Operation
Different error types can show up during processing. The most common is that the TTPM2 is
out of paper. All errors encountered by the printer, and requiring operator assistance, are
indicated with a signal from an indicator on top of the printer. The operator then has to follow
a specific procedure depending on the type of error that caused the stop. The procedures are as
follows:
11. Only in firmware version 01660-xxx. Added to version 01660-330
Yellow indicator lights
up
Indicates "No paper" in the selected paper entry. Insert new paper
supply or new single ticket. The document will be automatically
loaded to active position.
Yellow indicator ON
and green indicator ON
or flashing
No paper in the selected paper entry. Data string and print
command have been received. Insert paper into the selected paper
entry.