Specifications

Command Set
Summary of Commands
32
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
Magnetic Encoding/Decoding Commands
!D Reads and decodes data in ISO format from track 2 (or center track) page 53
!D1 Reads and decodes data in ISO format from track 1 page 53
!D3 Reads and decodes data in ISO format from track 3 page 53
!I Defines data to be encoded in ISO format on track 3 page 51
!J Defines data to be encoded in ISO format on track 1 page 51
!K Defines data to be encoded in Hex format on track 1 or 3 (as applicable) page 51
!M Defines data to be encoded in ISO format on track 2 (or center track) page 51
!N Defines data to be encoded in hexadecimal format on track 2 (or center
track)
page 51
!N+ Same as !N but reverses the bit order
a
)
a. Added in firmware version xxxxx-332.
!O1 Reads data in hexadecimal format from track 1 (or center track) page 7
!O2 Reads data in hexadecimal format from track 2 (or center track) page 7
!O3 Reads data in hexadecimal format from track 3 (or center track) page 7