Specifications

Command Set
Printing and Encoding Capability Overview
28
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
Extended Acknowledgement
2
It is possible to extend the acknowledgement procedure so that most commands are
acknowledged by the printer.
To enable the function you have to the send the command:
•!CA
A ticket should therefore always start with the commands:
•!C
•!CA
The extended acknowledgement is a command number appended to the ACK. The command
number is a 1 byte hexadecimal number according to the following table.
2. Introduced in version 4.06.
Command
Acknowledgement
When?
Normal Extended
!P 06h 06h 80h 06h 02h
After a successful magnetic encod-
ing. After printing.
!C 06h 04h
After clear memory
!F 06h 05h
After formatting data in memory
!L 06h 08h
After successful track load / eject
operation
!L17 06h 06h 08h
When the lower input contains ticket
stock
!L18 06h 06h 08h
When the upper input contains ticket
stock
!L3 06h 06h 08h
When a ticket has successfully been
loaded from the front to the upper
input track.
!L4 06h 06h 08h
When successful eject through front
entry
!E 06h 09h
After successful eject through rear
entry
!Q 06h 14h
After transaction string is written in
memory
!Z 06h 18h
After burn time is changed
!X 06h 19h
After changed resolution