Specifications

Operation
Self Test Mode/Ticket Repeat Mode
22
P1003645-001 TTPM2™ Installation and Programming Manual 03/05/2009
Self Test Mode/Ticket Repeat Mode
Self Test
1. Press and hold the front pushbutton at power ON to enter self-test mode.
2. Press again to encode and print one ticket. The printout shows current firmware version.
3. Turn printer OFF and ON to exit self-test mode.
Repeat Fixed Print
1. Start self-test mode as described above.
2. Download the ticket data to the printer, and print one ticket.
The data must only contain fixed text, fixed encoding data, and graphics.
3. Press the front button once and an exact copy of the first ticket will be printed.
This will be repeated each time that the front button is pressed.
4. Turn printer OFF and ON to return to normal operation.
Note • Do not hold the front button depressed! Doing so will result in erroneously cut tickets
often resulting in paper jam.
Note • Repeating fixed print only works on printers where the auto clear function is OFF.
Auto clear is enabled/disabled with a DIP-switch on the control board.