Specifications

21
Operation
Paper Jam Removal
03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001
Paper Jam Removal
Open the TTPM2 cover to locate and remove the ticket that is stuck in the mechanism. Use the
following procedure:
1. Select paper jam clearing mode
2. Power OFF.
3. Push and hold the rear pushbutton while turning ON the power.
The red indicator shows a steady light to indicate paper jam clearing mode.
Tickets Stuck In Input Module
Press and hold the center push button to eject the ticket towards the rear of the unit.
Tickets Stuck In Output Module
Press and hold the front push button to eject the ticket towards the front of the unit.
Exit Paper Jam Clearing Mode
Power OFF and back ON again, the TTPM2 is operational but any ticket information
previously sent to the unit is lost.
You can also power OFF the printer and turn the feed rolls manually to remove the blocking
ticket.
Figure 14 • Paper path.