User's Manual

Setup

Bluetooth Option Configuration

P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014

7. Check the printer’s display for the following screen. Verify that the pairing numbers

match.

If the numbers match, then press the ‘Next button’ in the ‘Add a device’ window and

then press the OK/Check Mark button on the printer’s control panel.

If the numbers do not match, use the printer’s control panel arrow keys to change the

highlighted ACCEPT to REJECT and then press the OK/Check Mark button on the

printer’s control panel.

8. When the paring process successfully completes, the following message will be displayed.

Note • Note the COM port number displayed in the task bar pop-up. It will only remain for a

few seconds.