User's Manual

Introduction
Control Panel
8
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
Control Panel
The control panel indicates the printer’s operating status and allows the user to control
basic printer operation.
Add
12
6 5811 9 7
1
2
3
4
Figure 4 • ZD500 Series™ Control Panel
10
1
STATUS light Shows the current status of the printer. For more information, see
Table 1 on page 9.
2
The PAUSE button starts or stops printer operation when pressed.
3
The FEED button forces the printer to feed one blank label each time the button is pressed.
4
The CANCEL button cancels print jobs when the printer is paused.
5
The RIGHT ARROW button, which is active only in the menu system, navigates to the right
through the main menu and to previous items in sub-menus.
6
The DOWN ARROW button changes the parameter values. Common uses are to decrease a value
or to scroll through choices.
7
The SELECT () button operates as follows:
• When on the Home screen, pressing enters the menu system.
• When in the menu system, pressing  accepts the values shown.
8
The UP ARROW button changes the parameter values. Common uses are to increase a value or to
scroll through choices.
9
The LEFT ARROW button, which is active only in the menu system, navigates to the left through
the main menu and to the next item in sub-menus.
10
RIGHT OPTION button These buttons execute the actions or commands shown directly above
them in the display.
11
LEFT OPTION button
12
The display shows the printer’s operating status and allows the user to navigate the menu system.