Owner`s manual

English

Select Menu

Your radio navigates through Select Menu as follows:

Choosing a Channel

Your radio has 8 channels and 121 Sub-codes you can use

to talk to others. In order to speak to someone, each of you

must set to the same channel and Sub-code.

To choose a channel:

1. Enter the CH/ Channel "CH" display.

2. Press OK to go to channel settings.

3. Press the or key to increase or decrease the

channel number displayed. If you press and hold the

or key, the channel number increase or decrease

continuously.

4. Press OK to confirm the setting.

Choosing a Sub-code

Allocating a Sub-code to your radio will help to reduce

interference but remember that the radios that have

different Sub-codes set will not be able to communicate

with each other. Each of the channels 1-8 may have any

one of the codes from 0 to 121.

1. Enter the CH/ . Advance through the Select Menu

until the "CODE" display.

2. Press OK to go to sub-code settings.

3. Press the or key to increase or decrease the Sub-

code number displayed. If you press and hold the or

key the channel number increase or decrease

continuously.

4. Press OK to confirm the setting.

CH/

Channel

Stopwatch

(Channel number)

CODE

(Code number)

2 CH

(Dual watch)

dual watch

Channel

number (1-8)

Sub-code

number (0-121)

On/Off

T8_EN.fm Page 7 Thursday, September 16, 2010 12:01 PM