Owner`s manual

17
English
Set Direct Call
The display shows ID number on Channel segments and ID
name blinks on sub-code segments.
Press the or key to select the ID number. Press OK
to transmit Direct Call command. The Direct Call command
will only transmit to the selected ID number.
The display shows the TX icon and Call icon while
transmitting.
The unit sounds will transmit the selected Call tone when
transmitting Direct Call command.
Note:Pressing the CH/ key will go back to All/Direct
Call setting.
Key Lock Activation
To Lock the keypad:
Press and hold the / key. The icon appears.
In sub-code segments shows "LOCK" for 2 seconds then it
returns to previous screen.
To Unlock the keypad:
Press and hold the / key again. The icon
disappears. In sub-code segments shows "UNLK" for 2
seconds then it returns to previous screen.
Note:If any key (except PTT) is pressed while LOCK
icon still displayed every press of keys will
sound with error tone.
Battery Low Alert
Battery Low alerts when the battery level becomes empty.
The alert starts 30 seconds after the Battery Low icon starts
blinking. The sub-code segment indicates "BATT" and the
Battery Low icon blinks.The alert tone sounds every
5 seconds for 30 seconds then the radio will automatically
power off.
LCD Backlight
The LCD backlight will automatically turn ON when any key
(except for PTT) is pressed. The LCD display will illuminate
for 10 seconds after the last key pressed.
ID number for Direct Call
ID name
T8_EN.fm Page 17 Thursday, September 16, 2010 12:01 PM