Owner`s manual

English

Dual Watch Mode

Your radio can scan the current channel and another

channel alternately. You need to set a channel number and

its Sub-code for another channel.

To set another channel and start Dual Watch:

1. Enter the CH/ . Advance through the select menu until

"2CH" display.

2. Press OK then press the or key to set the dual

channel to ON monitoring. Press OK again to set the

dual watch channel number.

3. Press the key to set the second channel number,

press OK then press the or key to select second

channel. Press OK again to confirm.

4. Press the key to set the second sub-code, Press OK

then press the or key to select second sub-code

number. Press OK again to confirm.

Note: If you set the same channel number and Sub-code

as the current channel, Dual Watch doesn’t work.

To turn the Dual Watch mode OFF:

Enter the CH/ . Advance through the select Menu until

"2CH" display. Press OK then press the or key to set

to OFF mode.

Press OK to confirm the setting.

Stopwatch Activation

You can use this radio as a Stopwatch timer. It can time up

to 60 minutes and 59 seconds.

Note: You can receive incoming signals during this mode.

To use the Stopwatch Timer

1. Press and hold the CH/ key until Stopwatch timer

displays.

2. Press the key to start Stopwatch timer.

Pressing the key again will Pause the timer.

3. Press the key to reset the Stopwatch timer.

4. Press and hold the CH/ key to exit the Stopwatch

timer function.

T8_EN.fm Page 8 Thursday, September 16, 2010 12:01 PM