Owner`s manual

English

Mode Menu

Your radio navigates through Mode Menu as follows:

Features on Your Radio

Channel Scan Mode

Enables your radio to scan for active channels. When activity is

detected, your radio lands (stays) on that channel

(for 2 seconds). To transmit on that channel, press the PTT

button. When activity on the landed channel ends, your radio

continues scanning other channels.

To turn the channel scan ON:

1. MENU/ to enter Mode Menu. Advance until blinks.

2. SEL/ to turn ON channel scan.

3. MENU/ , or PTT to turn OFF Scan mode.

Dual Watch Mode

Enables your to scan the current channel and another channel

alternately.

To set another channel and start Dual Watch:

1. MENU/ to enter Mode Menu. Advance until blinks.

2. or to select the channel, then press SEL/ .

3. or to select the Sub-code, then press SEL/ .

4. The radio starts to Dual Watch.

Note: If you set the same channel and Sub-code as the

current channel, Dual Watch doesn’t work.

5. MENU/ to turn the Dual Watch mode OFF.

Select the

Sensitivity

Normal

Scan Mode

Dual Watch

Mode

Room Monitor

Mode

Up Timer

Mode

Select the Channel

and Sub-Code

Normal

Up Timer

Mode

Room Monitor

Mode

Dual Watch

Mode

Scan Mode