Technical information

All of the printer controls and indicators
are located on the front of the unit,
except for the Power ON/OFF Switch,
which is located on the left side of the
printer.
Controls application of AC Power to
the printer. When Powered ON, the
printer will perform a Power ON
Self Test as it begins operation.
Turning the printer ON while
holding down certain Front Panel
Keys will cause additional Printer
Self Tests to occur once the Power
ON Self Test is completed. The AC
Power Switch should be turned OFF
prior to connecting or disconnecting
any cables.
The PAUSE Key stops and restarts
the printing process. If the printer is
idle (not printing) when the PAUSE
Key is pressed, no printing can take
place. If the PAUSE Key is pressed
while printing is in progress, the
printing stops once the current label
is completed.
Pressing the PAUSE Key a second
time resumes the printing process.
The FEED Key forces the printer to
feed one blank label. If the printer is
idle (not printing) or if the PAUSE
function is active when the FEED
Key is pressed, one blank label
feeds from the printer immediately.
If the printer is printing, one blank
label feeds out after completion of
the current batch of labels. After one
blank label is fed out, pressing the
FEED Key again will provide a
second blank label.
The CANCEL Key is only
recognized when the PAUSE
function is active. Press the
CANCEL Key and the current label
format will be canceled. If no
format is printing, the next one to be
Page 2-8 44868L