Reference guide

6 STB20XX Single Slot Cradles
Mounting Bracket (STB2000-F only)
The mounting bracket is used to install the cradle on a forklift. Mount the bracket so that
the cradle is within the user’s reach envelope. The recommended reach envelope has a
radius of 15 in. measured from the front of the user’s shoulder to the scanner grip.
Three isolators ensure secure attachment with minimized vibration. The bracket has
holes that provide access the host and power ports, and enable securing the cables
with cable ties.
CAUTION Ensure the Wall Mount Conversion Dial on the back of the cradle is in the
correct position for vertical mounting. If not, rotate the dial counterclockwise to activate
latches.
CAUTION Not for use in hazardous locations.
Cable
Access
Hole
Cable
Tie
Holes
Isolator
Cable
Tie
Holes
Cable
Tie
Holes
Isolator
Isolator
Mounting
Bracket
Forklift Mounting
Holes
Forklift
Mounting
Holes