Reference guide

Quick Reference Guide 11
Inserting the Scanner in the Cradle
To insert the scanner in the cradle, insert the scanner top first. Push the handle
until it clicks into place, engaging the contacts in the cradle and scanner.
Removing the Scanner from Forklift and Vertical Mounted
Cradles
To remove the scanner from a vertically mounted cradle, remove the bottom of the
scanner first.
Sending Data to the Host Computer (Bluetooth Cradle Only)
The cradle receives data from the scanner via a wireless radio connection and
transmits it to the host computer via the host cable. The scanner and cradle must
be paired for successful wireless communication.
Pairing (Bluetooth Cradle Only)
Pairing registers a scanner to the cradle such that the scanner and cradle can
exchange information. The STB2078 operates in two modes: scanner-to-cradle
and multi scanner-to-cradle. In scanner-to-cradle mode, the scanner is paired to
the cradle either by insertion into the cradle (if pairing on insertion is enabled), or
by scanning the pairing bar code. In multi scanner-to-cradle mode, up to seven
scanners can be paired to one cradle. A multi-point bar code must be scanned to
activate this feature.
The cradle includes pairing bar codes on both its front and back. To pair the
scanner with the cradle, scan a pairing bar code. A high-low-high-low beep
sequence followed by a low-high beep sequence indicates successful pairing and
connection to the remote device. A long low, long high beep sequence indicates
unsuccessful pairing. Refer to the User Guide for more information.
NOTE
When inserting the device in a wall mounted cradle, ensure the device’s hook
recesses engage the hooks on the wall mount adapter (when applicable).
1
2
1
2
1
2
Desk Mount
Forklift Mount
Wall Mount