Specifications

mySAP Business Suite

Installation of ZebraDesigner™ Zebra Device Types and Code Pages

01/19/2010 ZebraDesigner™ for mySAP™ Business Suite Reference Guide 14103L-003

Allocate a Development Class

You must either allocate a development class to this or make it a local object. The development

class is only required if you want to transport this object to other R/3 systems (local objects

can’t be transported to other R/3 systems). This is done from this dialog box:

You can enter a Development class and click , or press

Enter. You can skip the

Development class and click , or press

F7.

To select the local driver, do the following:

The Import from a Local File dialog box (below) prompts you for the device type definition

file and its location.

A dialog box similar to this opens:

1. Use the browse button to locate the file, such as ZLB_ZEB.PRI.

2. To start the upload process, click or press Enter.

When the process is complete, update messages will be displayed.

Note • If the device has already been uploaded, you will not see the above step.