User guide

Demo software
D2119 Dart RTLS User Guide 79
If required, right-click the map and select an option to zoom in or out, resize to fit, or rotate the
map.
Viewing and filtering the raw data stream from the Hub
You can view, record, and filter the raw data stream of location data from the Hub.
To view and filter the raw data stream from the Hub:
1 Start the Hub Administration and Management application, click Demonstration.
2 In the Demonstration view, right-click the map and select Check Raw Data.
3 In the Display Raw Data dialog box, under Data Selection, provide the following
information:
 Type of Data: Select the data types to display, which can be All, 3D/2D/1D, 3D/2D, 3D,
2D, 1D, P/N, or Diagnostic.