User guide

D2119 Dart RTLS User Guide 77
10 Demo software
Dart RTLS uses a JAVA™ client applet as a utility for displaying initial system check-out and
results (the location of tags and receivers). This utility serves as a demo. Most likely, you will
need to obtain client software that is tailored to a more specific application.
You can control the display of this demo utility by:
 Editing real-time demo graphics (on page 77)
 Viewing and filtering the raw data stream from the Hub (on page 79)
 Changing the display background (on page 81) by adding customized images
In This Section
Editing the display of real-time demo graphics ............................... 77
Viewing and filtering the raw data stream from the Hub .............. 79
Changing the site map ......................................................................... 81
Editing the display of real-time demo graphics
You can modify the display of graphics in the real-time demo application.
To edit the display of real-time demo graphics:
1 Start the Hub Administration and Management application, click Demonstration.
2 In the Demonstration view, on the Display Configuration tab, specify the following
information. To complete the edit, press Enter or click outside of editing area:
 Show tag data type: Select the applicable check boxes to display 3D, 2D, and/or 1D data.
"P" data is not available for display in this grid.
 Averaging weight: Enter a value to reduce jitter from one read to the next in tag
locations; the lower the averaging weight, the higher the averaging. To turn averaging
off, set the averaging weight to 1. For smallest amounts of jitter to be visible on the
display, an averaging weight of 0.1 to 0.3 is recommended. The range is 0.1 to 1.
 Display Options: Select the check boxes to show Enabled/Disabled Receivers,
Enabled/Disabled reference tags, Enabled/Disabled virtual groups,
ISO/IEEE/Dart/Sapphire Tags, and Tag IDs.