User guide

Hub administration
D2119 Dart RTLS User Guide 75
Admin User Access
An admin account is provided with Dart hub that is accessible through the RS232 port. This
user account has limited capability and is provided to allow IP address reset, user password
resets, and to restore factory configuration settings.
The UWH-1200 RS-232 port is a host male connector, to connect to a computer, a female to female null cable is
required (such as L-com CSNULL9FF-5A WWW.L-COM.COM).
Console port setup
Dart hub console port is located on the back of the hub and is fully compatible with RS-232
standard. Its setup is as following:
Baud Rate
115200
Date Bits
8
Parity
None
Stop Bits
1
Flow Control
None
To access the user account, login to the Dart hub RS232 console using user “admin” and
password “zebra”.