User guide

Hub administration
D2119 Dart RTLS User Guide 67
reasons. To be able to automatically retry after initial failure is a big convenience for the
customer. Dart RTLS system provides user the choice to enable automatic retry.
Reference suspension should only be used when on-site maintenance is an integral part of using the RTLS system.
To turn on/off reference tag suspension:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, click the Advanced tab to open the web page.
3 Check Suspend Reference Tags to turn on reference tag suspension or uncheck it to turn it
off.
4 If Suspend Reference Tags is enabled, then check or uncheck Suspension Retry on Fail box
to enable or disable automatic retry.
5 Click Save for the user settings to take effect.
Reference Suspension Protection
Some configuration changes to the Dart RTLS hub require system restart and re-referencing. In
cases where the system is configured for Reference Tag Suspension, there may be undesirable
consequences on making configuration changes.
To alert the user of changes that affect reference suspension, the setting “Confirmation on
critical change” has been added. When selected, the user will be warned of changes that will
affect the suspended reference tag status.
Password Checking on Confirmation
If System Access Control is set to ‘Sign-in Based Access’, then for added security, besides explicit
change confirmation, password based check can be enabled to check if the person has the
privilege to make the critical change. The confirmation password is the same as the access