User guide

Hub administration
D2119 Dart RTLS User Guide 64
FPGA firmware to hub hardware (Only for Hub FW 4.1.0 and lower).
Uploading new Receiver firmware
Uploading the receiver firmware to a different version is straight forward process. It includes
two steps: upload receiver firmware to the hub, and install the firmware to Receivers. Before
you start, make sure the client machine can access the receiver firmware through a CD, hard
drive, or local network.
Uploading receiver firmware is non-reversible. Therefore, make sure you install the proper firmware upgrade to the
Receivers.
To upload the receiver firmware to the hub:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on the RX FW tab, click Browse… to locate the receiver
firmware file to upload.
3 Click Upload.
4 Click OK when prompted to accept the uploaded receiver firmware.
To upload the new firmware to receiver(s):