User guide

Hub administration
D2119 Dart RTLS User Guide 59
Configuring SNMP
The Dart SNMP agent is compliant with the protocols SNMPv1, SNMPv2c, and SNMPv3. It
supports MIB II (RFC 1213 MIB) and SNMPv2 MIB and is compliant with generic traps outlined
in RFC-1215.
To enable or disable SNMP functionality:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on the SNMP tab, select or clear the Enable the SNMP Agent
check box.
3 Click Save.
To configure SNMP v1 or v2 community:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on the SNMP tab, in the SNMP v1/v2 Community table, right-
click a row and select Add to add a community (optional).
To delete a community, right-click the respective row and select Remove.
3 To modify a setting for a community, double-click the table cell in the community row; to
complete the edit, press Enter or click any other table cell. You can configure the following
settings:
 Name: The name of the community
 IP Address: The IP address of the host from which the community is allowed to access