User guide

Hub administration
D2119 Dart RTLS User Guide 55
The NTP daemon synchronizes the system time with a user-specified NTP server. For more
information about NTP and a list of public time servers, check the NTP Website at
http://www.ntp.org.
Proper operation of the NTP System Clock Synchronization feature requires that you specify the DNS
setting. Check with your system administrator to determine what DNS setting to use for your network.
To synchronize the Dart system clock to NTP:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on the Main tab, under System Clock Synchronization, from
the Synchronization mode list, select Network synchronization (NTP).
3 In the Preferred NTP server and Alternate NTP server fields, enter the IP address or URL of
the respective servers.
4 Click Save for the new setting to take effect.
To synchronize the Dart system to a local computer:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on the Main tab, under System Clock Synchronization, from
the Synchronization mode list, select Local host's date and time.
3 Click Save.
To manually enter a time and date for the Dart system:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on the Main tab, under System Clock Synchronization, from
the Synchronization mode list, select Manual Entry of Date and Time.
3 Enter the required date and time.
4 Click Save.