User guide

D2119 Dart RTLS User Guide 43
8 Configuring output control
By default, the Dart RTLS Hub provides a data output stream in various formats
For information on available output data formats, see System output (on page 83)
You can modify the data output from the Hub to:
 Enable output of diagnostic messages (D-packets) from the Hub.
 Indicate the quality of data provided from the Hub for Locate and Non-locate data.
To configure output control:
1 Start Hub Administration and Management application, click Administration.
2 In the Administration view, on Output tab, select the desired check boxes to enable output
data fields:
 Diagnostic Data. Select the check box to include D-packets in the corresponding output
stream. D-packets help diagnose problems encountered during both installation and
normal operation. Dart RTLS sends D-packets during system initialization, after each