User guide

Configuring Dart RTLS
D2119 Dart RTLS User Guide 33
2 In the Table View on the Configuration page, under Hub Setup, in the RTLS Receiver or
Proximity Receiver table, right-click a row and select Add to add a receiver (optional).
3 To modify a setting for a Receiver, double-click the respective field in the row for the
Receiver that requires editing; to complete the edit, press Enter or click any other table cell.
 Enabled: Double-click this field to activate or deactivate a Receiver for data collection.
 Rx # (hex): Enter a unique hexadecimal number (01 - FF) to represent the receiver.
 Local: Double-click this field to indicate whether the Receiver being added is Local or
not. Un-check this field as we are setting up a Remote Receiver, which is physically
connected to another hub.
 Receiver ID (hex): Enter the 4-byte hexadecimal number found on the back label of the
unit (00000010 – FFFFFFFF). Receiver ID cannot be specified for Remote Receiver.
 X, Y, Z: Enter the measured (x, y, z) position of the Receiver with respect to the origin (0,
0, 0) of the user-defined coordinate system. X,Y,Z cannot be specified for Remote
Receiver.
 Antenna (°): Enter the direction (from -180° to 180°) of the receiver antenna from the
direction of X axis. Antenna cannot be specified for Remote Receiver.
 Presence Detect: (RTLS Receivers only) Select this check box to direct the software to