User guide

Connecting to the Dart RTLS Hub
D2119 Dart RTLS User Guide 27
With a saved or newly created profile, click Connect on the Zebra Hub Manager, the hub
manger retrieves and starts the Hub Administration and Management application residing on
the target Hub. The look and feel of the Hub Administration and Management application
hasn’t changed and is similar to the Hub GUI accessed using the web browser for FW versions
earlier than 5.0.0. The user can then access the Administration, Configuration, Status,
Demonstration and Diagnostic pages for that particular hub, like before. The IP address of the
hub is displayed on the top of the page. This helps identify which hub is being accessed in case
multiple hub Administration and Management applications are open.
If an attempt is made to access Hubs with Firmware version earlier than 5.0.0 using Zebra Hub
Manager, then an error message is displayed asking the user to use the Web Browser instead of
the Zebra Hub Manager to access the Hub Administration and Management GUI.