User guide

Connecting to the Dart RTLS Hub
D2119 Dart RTLS User Guide 26
2 On the left hand side pane, click on All Profiles, and right click. Select either ‘New Folder’
or ‘New Profile’
3 ‘New Folder’ creates a new folder for saving your profiles. This way the user can organize
the different hub profiles under different categories (folders). For example – Profiles for all
hubs in physical location G1 can be created in a folder named ‘G1’.
4 ‘New Profile’ creates a new profile for the hub the user intends to access. The user needs to
specify the Profile Name (example Lab237) and Hub IP or Domain Name for the hub
(example 192.168.1.201). If the Hub uses secure connection, check the box ‘Enable HTTPS’.
Optionally select the type of verification that needs to occur while connecting to the hub.
5 Click on Save to save the profile setting for the Profile Name.
6 To make changes, click on the profile Name on the left hand side panel and then edit the
profile settings on the right side panel and click Save to save the changes.
7 To move the profile to another folder, press down left mouse button on the profile and drag
and drop it into the new location.
8 To rename a folder or profile, double click on the folder/profile name and edit. After edit,
press Enter key or just click mouse outside of the editing field.
9 To remove a profile, select the profile and right click and select Remove.
10 A folder can be removed only when it is empty. Click and select the folder, then right click
and choose Remove.
Hub Administration and Management application