User guide

Connecting to the Dart RTLS Hub

D2119 Dart RTLS User Guide 19

6 Connecting to the Dart RTLS Hub

Configuring and retrieving data requires a computer connection to the Dart RTLS Hub. You can

connect the computer to the Hub through a direct connection or through a LAN. These are the

default IP settings for the Hub:

IP Address 192.168.1.204

Subnet mask: 255.255.255.0

Default gateway address: 192.168.1.1

In This Section

System Requirements........................................................................... 19

Connecting the Dart RTLS Hub to a PC through a LAN ................ 20

Connecting to a Dart RTLS Hub with an unknown IP address ..... 20

Hub Administration and Management ............................................. 20

Zebra Hub Manager ............................................................................. 25

Hub Administration and Management application ........................ 26

Required ports for connecting to the Dart RTLS Hub ..................... 28

Software Compatibility ........................................................................ 28

System Requirements

The UWH-1200 firmware requires a JAVA™ Plug-in. If JAVA is not installed, you will be

prompted to install the Java2 Runtime Environment (JRE version 1.6.0_23 or later) from the

Oracle Technology Network website

(http://www.oracle.com/technetwork/java/javase/downloads/index.html).

For Windows 7/8/8.1 computer, please refer the table below to select the right JRE to install.

Windows 7

Browser

JRE

64 Bits

32 Bits

64 Bits

32 Bits