User guide

Connecting the Receiver cables
D2119 Dart RTLS User Guide 16
4 Connect the remaining end of the second CAT 5E cable to the RJ45 connector marked "IN" of
Receiver #2.
5 Connect a third CAT 5E cable to the RJ45 connector marked "OUT" of Receiver #2.
6 Connect the remaining end of the third CAT 5E cable to the RJ45 connector marked "IN" of
Receiver #3.
7 Connect the last (fourth) CAT 5E cable to the RJ45 connector marked "OUT" of Receiver #3.
8 Connect the remaining end of the fourth CAT 5E cable to the RJ45 connector marked "IN" of
Receiver #4.
9 Continue to connect additional Receivers as required to the chain in series.
10 For optimal performance, evenly distribute receivers across all 8 hub ports.
Connecting Receivers in a star and daisy chain to the Hub
The Dart RTLS Hub supports a combination of daisy chain and star Receiver connections. To
accomplish this, follow the appropriate steps:
 Star configuration (on page 15)
 Daisy chain configuration (on page 15)