User guide

Appendix B: Diagnostics Output Data (D-packets)
D2119 Dart RTLS User Guide 108
Evt_id
Evt_msg
Description
Info
0
Tag Resets
Tag Reset (due to low battery?)
Extended information from
the tag
1
Dart Wand turned
tag on
Dart wand turned on a tag
which was previously off
0
2
Dart Wand turned
tag off
Dart wand turned a tag off
which was previously on
0
3
Dart Wand changed
tag blink rate
Dart wand changed the blink
rate of the tag
0
4
Whereport turned tag
on
Tag, previously off, was turned
on upon entering a
(configured) WherePort field.
Whereport ID
5
Whereport turned tag
off
Tag, previously on, was turned
off upon entering a
(configured) WherePort field.
Whereport ID
6
Accelerometer
changed tag blink
rate
Motion sensor within the tag
caused the tag to change its
blink rate.
Rate number (0/1/2)
7
Whereport changed
tag blink rate
Configured Whereport
changed the blink rate of the
tag
Whereport ID
8
Tag passed through
whereport field
Tag passed through the
(configured) WherePort field,
but no action was performed
by the WherePort.
Whereport ID
9
Tag encountered an
unknown whereport
Tag encountered a whereport
not configured in the hub.
Whereport ID
11
Tag experienced
momentary
movement
Motion sensor within the tag
detected a momentary
movement
Event Count
12
Tag rotation started
Motion sensor within the tag
detected the start of rotation
Event Count
13
Tag rotation stopped
Motion sensor within the tag
detected the end of rotation
Event Count