User guide

Status
D2119 Dart RTLS User Guide 102
This tab contains information for all receivers detected by the hub:
 Rx #: The receiver # of the receiver being configured. Otherwise, left blank.
 Rx ID: Corresponding Receiver ID for the detected receiver.
 Temp: The current temperature in Celsius at the receiver.
 Volt: The current input voltage at the receiver
 RF Card Serial No: Serial number for the Receiver RF board.
 Dig Card Serial No: Serial number for the Receiver Digital board.
 Antenna Type: Type of antenna installed on the receiver.
 FW version: Version number of the firmware currently running on the receiver.
 ISO/IEEE Compatible: Indicates if the receiver is compatible with receiving ISO/IEEE
formatted tags.
 Enabled: Indicates if the receiver is enabled. When blank the receiver is disabled or not
configured
 RTLS/PROX: Indicates if the receiver is configured to be a RTLS or Proximity receiver.
When blank, the receiver is not configured.
 Local: Indicates whether the receiver is a local receiver, physically connected on this hub,
or a remote receiver, physically connected on another hub, or remote hub.
 X, Y, Z: Location of the receiver being configured. Leave blank if the receiver is not
configured.
 Antenna Dire(°): Direction of receiver antenna being configured. Leave blank if the