User guide

Status
D2119 Dart RTLS User Guide 100
 Reduced read range A special character ‘^’ is appended if the receiver has read range
less than the maximum (25 in coarse range control mode or 54 in fine range control
mode).
In the following example, the Receiver #01 has an External antenna that is set at a read
range setting of “24”.
 Mismatched read range: A special character ‘~’ is appended if the receiver has different
read range setting than configured. This condition should not happen in normal
condition. You should contact the factory if this condition appears.
In the following example, the Receiver #81 with a High-Gain antenna is reporting a read
range setting not agreeing with its configured read range of “20”.
3 Double-click on a Receiver rectangle to view more details about that receiver, such as:
 Indication message (light green), such as:
Receiver firmware upgrade is available.
 Warning message (yellow), such as:
Antenna type cannot be detected. Because a Receiver should be able to detect all antenna
types, you should contact the factory if this message appears.
Receiver is not enabled.
Receiver has low voltage.