Operator`s manual

ZVac Models ZV110, ZV220, ZV440 Manual Zebra Skimmers Corp.
Page 8 888-249-4855 • www.ZebraSkimmers.com • Zebra Skimmers Corporation
Zebra Skimmers Corp. ZVac Models ZV110, ZV220, ZV440 Manual
888-249-4855 • www.ZebraSkimmers.com • Zebra Skimmers Corporation Page 9
5.1 Preliminary Start-up Operations
Figure 5.1
- Fit the accessories on suction inlet “1”
- Place the vacuum near the place of use and then
lock the castors “2” by pressing lever “3” down-
wards
5.2 Starting
Reference Figure 5.1 on previous page
Check that the voltage and frequency of the main elec-
tricity correspond to the values indicated on the data
plate. Fit the plug into the socket.
- Turn main switch to ON position. Light 3 will
come on
- Press the start button
5.3 Stopping
- Press the STOP button.
5.4 Stopping, automatic
The suction action will automatically stop when the
uid in the tank reaches the maximum level, activated
by the level probe
5.5 Emptying the Tank (Fig. 5.6)
- Turn uid discharge selector “4” to ON position to
drain uid from the tank
- Hold the gun “2” and press lever “3” to drain the
uid from the liquid holding tank
5.6 Emptying the Container (Fig. 5.7)
- Detach the hose pipe “1” from the suction port
- Detach the clip “2” and remove the cover “3”
- Lift the swarf container “4” using suitable lifting
means
- Empty the container into the proper disposal bin
- Thoroughly clean container holes to prevent ob-
structions
Figure 5.6
Figure 5.7