Operator`s manual
ZVac Models ZV110, ZV220, ZV440 Manual Zebra Skimmers Corp.
Page 2 888-249-4855 • www.ZebraSkimmers.com • Zebra Skimmers Corporation
Zebra Skimmers Corp. ZVac Models ZV110, ZV220, ZV440 Manual
888-249-4855 • www.ZebraSkimmers.com • Zebra Skimmers Corporation Page 3
1- General Information
1.1 Introduction
This Maintenance and Instruction Manual contains the
information required to familiarise the operator with the
proper use of the following types of vacuums (also re-
ferred to as “machine” in the following manual): ZV110,
ZV220, ZV440
The operational safety of the machine in your posses-
sion is entrusted to those who work with it each day.
These persons must therefore have detailed informa-
tion about how to correctly use, operate, service, and
repair the vacuum.
This manual has been compiled in order to inform ma-
chine users about the prescriptions and basic regula-
tions able to ensure their safety and allow the vacuum
to remain in a good working condition for the longest
possible time.
Personnel authorized to work with the machine must
read this manual before the machine is started.
Keep the manual near the machine, in a protected and
dry place for future consultation when required. Ask
for another copy from your Dealer or Zebra Skimmers
if this manual is lost or deteriorates.
This manual reects the state-of-the-art at the mo-
ment the machine was sold and cannot be considered
inadequate if modications are subsequently made in
compliance with further experience.
The Manufacturer therefore reserves the right to up-
date the production range and relative manuals with-
out being obliged to update previous machines.
1.2 Testing and Guarantee
Each machine is subjected to a nal test involving its
operations and performance. This guarantees maxi-
mum efciency during the work the machine must
carry out.
1.3 Requesting Assistance
Contact the Manufacturer in the event of faults or
malfunctions requiring the intervention of specialized
technicians.
1.4 Exclusion of Liability
The machine was delivered to the user according to
the conditions that were valid at the time of purchase.
For no reason shall the user be authorized to tam-
per with the machine. Contact Zebra Skimmers in
the event of any faults. All attempts by the user or by
unauthorized personnel to demount, modify or, more
generally, tamper with any part of the machine, shall
void the warranty and relieve the Manufacturer of all
responsibility for damage to either persons or property
caused by such action. The Manufacturer shall also
be relieved of liability in the following cases: - incorrect
installation
- improper use of the machine by inadequately trained
personnel
- incorrect or insufcient maintenance
- use of spurious spares or use of spares that are not
specically made for the model in question
- total or partial failure to comply with the instructions
- exceptional environmental events
2 - Delivery and Handling
2.1 Delivery
The machine is xed to a pallet and wrapped in plastic
lm. On arrival, check the machine to see that it has
not been damaged during transport. If this is the case,
contact the Manufacturer and the hauler immediately.
2.2 Handling
Use a lift truck with proper capacity to lift and convey
the vacuum, positioning the forks in the center of the
load. Refer to the technical data section for weights of
each machine.
3 - General Descriptions
3.1.1 Main Parts Key, ZV110, ZV220 (Fig. 3.1.1)
1. Vacuum motor
2. Liquid ejector pump
3. Control Panel
4. Automatic level control
5. Safety lter
6. Swarf tank
7. Quick tting hose
8. Swarf tank cover
9. Fixed wheel
10. Liquid tank
11. Sight glass
12. Castors with brake
13. Liquid drain off gun tube
14. Cable connection
15. Fluid drain cock
16. Sound proong box
17. Gun connection