Datasheet

AP 300 Access Point AP 5131 Access Point AP 5181 Outdoor Access Point
Product Overview
Working in conjunction with Motorola’s wireless
controllers, the AP 300 Access Point (AP) delivers
robust and feature rich IEEE 802.11a/b/g connectivity.
Adoptable as either a Layer 2 or Layer 3 device, the
AP 300 can also be utilized as a sensor in conjunction
with Motorola’s Wireless Intrusion Protection
System (IPS). Two models offer greater mounting
flexibility: an internal antenna model designed for
the carpeted space and an external antenna model
that can be mounted above ceiling tiles.
The AP 5131 802.11a/b/g adaptive access point
offers enterprise-class wired and wireless
networking and security features for small to
medium businesses and enterprise small branch
office locations. The 24x7 dual-band WIPS sensing
and mesh networking combine to deliver gap-free
security and the cost-effective extension of the
corporate network in difficult-to-cable areas.
Motorola’s AP 5181 outdoor 802.11a/b/g adaptive
access point delivers enterprise class access
wireless networking in harsh environments. Support
of MESH networking enables rapid and inexpensive
deployment in difficult-to-cable areas
General Specifications
• 802.11a/b/g
• Dual and single radio options
• 802.3af Power over Ethernet (PoE)
• Plenum-rated external antenna model
• Operating temperature:
Internal antenna model —
32°F to 104°F/0°C to 40°C
External antenna model —
-4°F to 122°F/-20°C to 50°C
• 802.11a/b/g; DSSS and OFDM
• Dual and single radio options
• 802.3af Power-over-Ethernet (PoE)
• Mesh networking
• Adaptive AP support (enables adoption
of Motorola adaptive access points)
• Plenum-rated housing
• Up to 127 devices supported
• -4°F to 122°F/-20°C to 50°C
• Desktop; wall; above drop and under-ceiling
• Standalone, dependent or adaptive
• 802.11a/b/g; DSSS and OFDM
• Dual and single radio options
• 802.3af Power-over-Ethernet (PoE)
• Mesh networking
• Adaptive AP support (enables adoption
of Motorola adaptive access points)
• Plenum-rated housing; IP56; NEMA 4X
• Up to 127 devices supported
• -22°F to 131°F/-30°C to 55°C
• Mounts on wall or pole
Gap-free Security
24x7 Wireless IPS Sensing
Supports gap-free security with WS 2000,
RFS 4000, RFS 6000 and RFS 7000 Wireless
Controllers, including 24x7 dedicated WIPS sensor
Supports gap-free detection and security with 24x7 dual band WIPS sensing and concurrent client access
Authentication
Pre-shared keys (PSK); 802.1x/EAP - transport layer security (TLS); tunneled transport layer security (TTLS);
protected EAP (PEAP)
Encryption
WEP 40M28 (RC4); WPA-TKIP; WPA2-CCMP (AES); 802.11i WPA2
Guest Access
Secure guest access with onboard or external RADIUS authentication
IPSec VPN
Supports DES, 3DES, AES-128 and AES-256 encryption; supports site-to-site VPN capabilities
Stateful Firewall
Stateful packet filtering wireless firewall; Access Control Lists
PCI
Out-of-the-box PCI capable
Unmatched Reliability
Failover Adaptive Network Services
at the Edge
Supports unmatched reliability in dependent
access point mode in conjunction with WS 2000,
RFS 4000, RFS 6000 and RFS 7000; does not offer
stand-alone or adaptive network services
Layer 3 routing; 802.1Q VLAN trunking and tagging; AAA Server; DHCP services; Dyn DNS; PPPoE
QoS
Voice prioritization; WMM; WMM uAPSD; 802.1p; DiffServ/TOS
Mesh Networking
Stand-alone MESH; Adaptive MESH; self-healing MESH failover; Layer 2 wired MESH failover
Adaptive AP with Site Survivability
Full featured Access Point for local or remote edge deployments is centrally
managed by controller with Remote Site Survivability (RSS) options and full network
and security services at the edge
WAN Connectivity/Failover
Dual Gigabit Ethernet for LAN/WAN connectivity and WAN failover options
3G WAN Backhaul
N/A
Best Return on Investment (ROI) — and lowest Total Cost of Ownership (TCO)
Integrated Network Services w/
Network-in-a-Box
Low total cost of ownership
Routing, security and network services integration eliminates point products and appliances, saving
significant capex and opex
802.3af Dual Radio High Performance Eliminates costly upgrades to PoE infrastructure
Mesh Networking
Eliminates expensive PoE infrastructure in greenfield deployments and cost of cabling in hard-to-cable areas
Easy to Provision and Deploy
Takes up to 75% less time to configure than comparable enterprise AP offerings in the
market, reducing deployment and management overhead
Single Platform with Adaptive ID for
all environments
Industrial grade design with adaptive facade provides one platform with a single firmware to manage
for all environments (carpeted or rugged) and all scenarios (campus, edge, remote deployments in standalone
or adaptive mode), reducing complexity and overhead of deployment
Services
Warranty
Hardware — 1 Year; Software — 90 days Hardware — One (1) year; Software — 90 days
Recommended Services
Service from the Start Advance
Exchange Support
Service from the Start Advance Exchange Support; Wireless Infrastructure Device Software Support
Access Points
7