Datasheet

10
Wallplate Access Points
MC 802 Wallplate Access Point AP 6511 802.11n Wallplate Access Point
Product Overview
The Motorola MC 802 Wallplate access point is a plug and play wireless
802.11 b/g access point powered over analog telephone wires. The MC 802
enables the fast and easy extension of WLAN coverage to multiple dwelling
units (MDU) such as hotels, hospitals, dormitories and barracks where
installing Ethernet cabling is difficult and expensive. The MC 802 can be
installed over any telephone jack that uses only a single pair of wire for
backhaul. The solution includes the T3 PowerBroadBand Switch which provides
adaptive line power for up to 25 MC 802 Wallplate access points.
Designed to ‘hide in sight’, the AP 6511 is a sleek and slim access point that
can be installed in minutes over any category 5 or 6 structured wiring plate. It
features an 802.11n radio, plus the modularity to easily snap-on three to four
additional switched Ethernet ports or use the keystone port to snap-on any
standard connector such as RJ11, RJ45, COAX f-connector and more. Designed
to meet the wireless and wired needs of multi-dwelling units such as hotels,
long-term healthcare, and dormitories. Native controller software enables one AP
to provide control for 25 AP 6511s. AP 6511s can be adopted and controlled by
a Motorola RFS controller. The AP 6511 packs enterprise wireless features and
modular add-ons into a deceptively simple design.
General Specifications
• Each MC 802 Wallplate Access Point includes one 802.11b/g radio, two
10/100Mb ports, and one pass-through analog telephone port for POTS
(plain old telephone service). Operates up to 1,000 ft (300 m) from the T3
PowerBroadBand Switch over single copper wire pair.
• T3 PowerBroadBand is a 25 port Switch with 25 downstream UTP ports and
2 GigE uplink Ethernet ports. Each port provides Motorolas patented Adaptive
Line Power (ALP) which delivers operating power to the MC 802 overanalog
telephone service at line rates up-to 75 Mbps down and 10 Mbps up.
• 802.11a/b/g/n; DSSS and OFDM
• Single radio (Field select 2.4, 5.0 or dual-band sensor)
• 802.3af Power-over-Ethernet (PoE)
• Single hop mesh (available post Rev-A)
• Adaptive AP support (available post Rev-A)
• -0°F to 104°F/-20°C to 40°C
• Wall plate, desk, wall mount
• 20dBm radio, 2x2 MIMO
• Integrated controller software for 25 AP 6511s
Gap-free Security
24x7 Wireless IPS Sensing
Secure management access to the MC 802 Wireless Wallplate through the
T3 PowerBroadband Switch. Port and client isolation is guaranteed by a
hierarchical VLAN topology that begins at the MC 802 and continues through
the connected T3 PowerBroadband Switch. Security features include ACLs
and wireless encryption standards from WEP to WPA2/TKIP/AES Enterprise.
Support for EAP types includes TLS, TTLS, PEAPv0 and MD5.
Can be adopted for opportunistic sensing or dedicated 24x7 dual-band sensing
Authentication
Pre-shared keys (PSK); 802.1x/EAP – transport layer security (TLS); tunneled
transport layer security (TTLS); protected EAP (PEAP)
Encryption WEP 40M28 (RC4); WPA-TKIP; WPA2-CCMP (AES); 802.11i WPA2
Guest Access
802.1x authentication on all wireless and wired interfaces via
external RADIUS or Motorola RF Controller
IPSec VPN Not required
Stateful Firewall Layer 2 and 3 packet inspection; Access Control Lists
PCI Not required
Unmatched Reliability
Failover Adaptive Network Services
at the Edge
An easy to use Web-based management interface combines with continuous
RF monitoring, peak performance graphs and a self-healing
WLAN for the unmatched reliability required to deliver dependable high
network availability.
L3 routing; 802.1Q VLAN trunk and tagging; DHCP server
QoS
Voice prioritization; WMM; WMM uAPSD; 802.1p; DiffServ/TOS
Mesh Networking
Standalone and adaptive Mesh available post Rev-A
Adaptive AP with Site Survivability
Full featured access point for local or remote edge deployments is centrally
managed by controller with Remote Site Survivability (RSS) options and full
network and security services at the edge; post Rev-A
WAN Connectivity/Failover
Single 10/100Mb uplink Ethernet port
3G WAN Backhaul
None
Best Return on Investment (ROI) — and lowest Total Cost of Ownership (TCO)
Integrated Network Services w/
Network-in-a-Box
Each access point installs in minutes without the need for pulling
cable or adding POE switch ports. The access points are located inside
each MDU room, which avoids the radio frequency thwarting perimeter
wall. Coverage is increased without AP-to-AP interference — reducing the
number of required access points.
Basic routing, security and network services. Connect to RF Controller for
additional features and more granular control
802.3af Dual Radio High Performance N/A
Mesh Networking
Single hop Mesh
Easy to Provision and Deploy
Designed for rapid installation and fast configuration.
Significant cost savings in deployment and operations
Services
Warranty
Hardware — One (1) year; Software — 90 days Hardware — One (1) year; Software — 90 days
Recommended Services
Service from the Start Advance Exchange Support; Wireless Infrastructure
Device Software Support
Service from the Start Advance Exchange Support; Wireless Infrastructure Device
Software Support
Motorola’s wireless LAN portfolio (continued)