Quick Start Guide

RFD40 RFID Sled Quick Start Guide
6
Removing the TC20 into the RFD40 Sled
To remove the TC20 Mobile Computer from the RFD40 Sled, firmly hold the sled handle, and lift the TC20 off of the sled
base.
Getting Started
To use the RFD40 for the first time with the TC20 Mobile Computer:
1. Charge the RFD40 Sled in the charging cradle.
2. Attach the TC20 on the RFD40 Sled.
3. Set the region and power level (using the RFID Manager application, RFID Demo application, or the partner
application).
For the latest versions of guides and software, go to: www.zebra.com/support.
Software
Using RFID Manager for Android /RFID Demo
To use the RFID Manager / Zebra RFID Demo for RFID operations:
1. Ensure that the RFID Manager for Android is installed on the TC20. The Zebra RFID Demo can be installed after RFID
Manager is installed and verified.
2. Launch either application on the TC20.
NOTE The Zebra RFID Manager for Android application must be installed before the RFID Demo
application.