Quick Start Guide

4 RE40 RFID Module
2. Connect the development board to your Windows PC using the micro USB data
cable.
3. Connect the 5V power supply to a power source and to the development board
using the micro USB power cable.
4. Observe the LED on the DKRE to indicate that the module is powered on.
5. Based on the country of operation, select a US (902-928 MHz, p/n S9025PR), EU
(865-870 MHz, p/n S8655PL), or universal antenna (860-960 MHz, p/n
9000984-XLPDNB) provided in the DKRE kit.
6. Connect the appropriate antenna to one of the SMA antenna connectors (J201 or
J204) using the SMA RF Cable.
USB
UART
USB
Power
DC 5V
Power
USB
Data